Step-by-step guide to provision your Draytek Vigor2927 router for IPTechView. Connect, update firmware, configure VPN using regional OVPN files, enable Webhook, save and reboot. Finally, verify VPN connection and register the device on IPTechView using its MAC-based UUID.
How To Provision the Draytek Vigor2927 Series To Connect To IPTechView
Draytek 2927 Series on IPTechView
1. Connect Router WAN to network; Connect PC to LAN and open 192.168.1.1 login with admin / admin
2. Update firmware to using this Firmware
3. VPN and Remote Access >> LAN to LAN>> 16
Use one of the two files below:
OpenVPN File to load By default: IPT_tunnel_us_east_1_TCP.ovpn
OpenVPN File to load only IF customer is in WEST Region: IPT_tunnel_us_west_1_TCP.ovpn
After Saving Validate VPN profile Always on setting is enabled
4. Go to System Maintenance >> Webhook
Server URL: http://draytek-router-api.iptechview.com/index.php
Period: 3
4.1 Objects Setting >> IP Object Click on Profile 32
4.2 System Maintenance >> Management
Save & reboot
5. Verify OpenVPN connected under VPN and Remote Access >> Connection Management
Log into IPTechView or MXMSP and add Device:
Or
You will have to enter the device’s UUID which is the MAC address.
